Atheros Client Utility Help

Introduction
System Requirements

Profile Management
Create or Modify a Profile
Remove a Profile
Profile Auto Selection
Switch Profiles
Configure TCP/IP
Configuring Win XP

Security
EAP-FAST
EAP-TLS
EAP-TTLS
PEAP (EAP-GTC)
PEAP (EAP-MSCHAP V2)
LEAP
WPA Passphrase

Check Status or Diagnostics
Check Current Status
Check Driver Information
Check Statistics

Connect to Another Network

Settings
Signal Strength Display
Data Display
Display Refresh Interval

Tools
Tray Icon
Troubleshooting Utility
Enable/ Disable the Radio

Infrastructure (Access Point) Mode Profile Configuration

To configure a profile in infrastructure (access point) mode, change the Network Type in the Advanced tab. For access point mode, modify the settings:

	Transmit Power Level
	Power Save Mode
	802.11b Preamble (if using 802.11b)
	Wireless Mode
	802.11a Authentication Mode (if using 802.11a)

Make sure to also edit the General and Security tabs.