Atheros Client Utility Help

Introduction
System Requirements

Profile Management
Create or Modify a Profile
Remove a Profile
Profile Auto Selection
Switch Profiles
Configure TCP/IP
Configuring Win XP

Security
EAP-FAST
EAP-TLS
EAP-TTLS
PEAP (EAP-GTC)
PEAP (EAP-MSCHAP V2)
LEAP
WPA Passphrase

Check Status or Diagnostics
Check Current Status
Check Driver Information
Check Statistics

Connect to Another Network

Settings
Signal Strength Display
Data Display
Display Refresh Interval

Tools
Tray Icon
Troubleshooting Utility
Enable/ Disable the Radio

General Tab

In the Atheros Client Utility, access the General tab by clicking New or Modify on the Profile Management tab.

Edit the fields in the General tab to configure the configuration profile. Make sure to also edit the Security and Advanced tabs.

Profile Name	Identifies the configuration profile. This name must be unique. Profile names are not case sensitive.
Client Name	Identifies the client machine.
Network Names (SSIDs)	The IEEE 802.11 wireless network name. This field has a maximum limit of 32 characters. Configure up to three SSIDs (SSID1, SSID2, and SSID3).

See also:

	Configure a Profile for Ad Hoc Mode
	Configure a Profile for Access Point (Infrastructure) Mode