[Comm] Re: Вопрос о кино под Linux
Немос
nemos на newmail.ru
Чт Дек 18 14:48:50 MSK 2003
Прошу прощения поспешил.
Во первых было рекомендовано проверить настроен ли framebuffer и mtrr,
насколько понял документацию можно просто посмотреть файл /proc/fb и
/proc/mtrr, вот их содержание
fb:
0 VESA VGA
mtrr:
reg00: base=0xe0000000 (3584MB), size= 8MB: write-combining, count=1
Вроде это означает что все настроено и работает.
Во вторых на одном фильме mplayer тормозил и одно из рекомендация было
использовать alsa. Я установил соответствующий пакет и modprobe запустил
драйвер установил с помощью alsamixer параметры каналов но mplayer
молчит(но проигрывает картинку),как и kde.Что не так?
Вот вывод amixer:
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 47 [75%] [off]
Front Right: Playback 47 [75%] [off]
Simple mixer control 'FM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 24 [77%] [off]
Front Right: Playback 24 [77%] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 24 [77%] [off]
Front Right: Playback 24 [77%] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 24 [77%] [on]
Front Right: Playback 24 [77%] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 11 [73%]
Front Right: Capture 11 [73%]
Simple mixer control 'Loopback',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Mono
Limits: Capture 0 - 63
Mono: Capture 47 [75%] [off]
А вот вывод mplayer:
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale
MPlayer 0.90rc3-2.95.3 (C) 2000-2003 Arpad Gereoffy (see DOCS)
CPU: Advanced Micro Devices K6-2 (Family: 5, Stepping: 12)
Detected cache-line size is 32 bytes
CPUflags: MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0
Compiled with Runtime CPU Detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with
--disable-runtime-cpudetection
Reading config file /etc/MPlayer/mplayer.conf: No such file or directory
Reading config file /home/???/.mplayer/config
Reading /home/???/.mplayer/codecs.conf: can't open
'/home/???/.mplayer/codecs.conf': No such file or directory
Reading /etc/MPlayer/codecs.conf: 49 audio & 130 video codecs
font: can't open file: /home/???/.mplayer/font/font.desc
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Font /usr/share/MPlayer/font/font.desc loaded successfully! (237 chars)
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Using usleep() timing
Can't open input config file /home/???/.mplayer/input.conf : No such
file or directory
Can't open input config file /etc/MPlayer/input.conf : No such file or
directory
Falling back on default (hardcoded) input config
Playing blade.avi
AVI file format detected.
VIDEO: [DIV3] 608x320 24bpp 23,98 fps 1369,0 kbps (167,1 kbyte/s)
Clip info:
Software: Nandub v1.0rc2
Name: Blade 2
Subject: Blade 2
Artist: студия "полный Пэ"
Copyright:
Comments:
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 16000->176400 (128,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
[vo_gl] Using 4 as slice_height (0 means image_height).
SDL: Initializing of SDL failed: Unable to open mouse.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
audio_setup: Can't open audio device /dev/dsp: No such device
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 44100 Hz, 2 channels, Signed 16-bit
(Little-Endian)
alsa-init: 1 soundcard found, using: hw:0,0
alsa9: 44100 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little
Endian
AO: [alsa9] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 608 x 320 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [fbdev] 608x320 => 608x320 Planar YV12
Using MMX for colorspace transform
A: 0,0 V: 0,0 A-V: 0,048 ct: 0,000 1/ 1 0% 0% 0,0% 0 0 0%
A: 0,1 V: 0,0 A-V: 0,061 ct: 0,004 2/ 2 0% 0% 0,0% 0 0 0%
A: 0,1 V: 0,1 A-V: 0,042 ct: 0,008 3/ 3 0% 0% 0,0% 0 0 0%
A: 0,1 V: 0,1 A-V: 0,020 ct: 0,010 4/ 4 0% 0% 0,0% 0 0 0%
A: 0,2 V: 0,2 A-V: 0,003 ct: 0,011 5/ 5 0% 0% 0,0% 0 0 0%
A: 0,2 V: 0,2 A-V: -0,018 ct: 0,009 6/ 6 0% 0% 0,0% 0 0 0%
A: 0,2 V: 0,3 A-V: -0,013 ct: 0,008 7/ 7 0% 0% 0,0% 0 0 0%
A: 0,3 V: 0,3 A-V: -0,015 ct: 0,006 8/ 8 0% 0% 0,0% 0 0 0%
A: 0,3 V: 0,3 A-V: -0,016 ct: 0,005 9/ 9 0% 0% 0,0% 0 0 0%
A: 0,4 V: 0,4 A-V: -0,005 ct: 0,004 10/ 10 0% 0% 0,0% 0 0 0%
A: 0,4 V: 0,4 A-V: 0,003 ct: 0,004 11/ 11 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,5 A-V: -0,008 ct: 0,004 12/ 12 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,5 A-V: -0,000 ct: 0,004 13/ 13 61% 0% 10,8% 0 0 0%
A: 0,5 V: 0,5 A-V: -0,002 ct: 0,003 14/ 14 60% 0% 10,5% 0 0 0%
A: 0,6 V: 0,6 A-V: 0,007 ct: 0,004 15/ 15 58% 0% 10,1% 0 0 0%
A: 0,6 V: 0,6 A-V: 0,005 ct: 0,004 16/ 16 57% 0% 9,9% 0 0 0%
A: 0,7 V: 0,7 A-V: -0,003 ct: 0,004 17/ 17 56% 0% 9,7% 0 0 0%
A: 0,7 V: 0,7 A-V: 0,014 ct: 0,006 18/ 18 56% 0% 9,4% 0 0 0%
A: 0,7 V: 0,8 A-V: -0,007 ct: 0,005 19/ 19 55% 0% 9,3% 0 0 0%
A: 0,8 V: 0,8 A-V: 0,005 ct: 0,005 20/ 20 54% 0% 9,1% 0 0 0%
A: 0,8 V: 0,8 A-V: -0,003 ct: 0,005 21/ 21 54% 0% 9,0% 0 0 0%
A: 0,9 V: 0,9 A-V: -0,002 ct: 0,005 22/ 22 54% 0% 8,7% 0 0 0%
A: 0,9 V: 0,9 A-V: -0,007 ct: 0,004 23/ 23 54% 0% 8,7% 0 0 0%
A: 1,0 V: 1,0 A-V: -0,005 ct: 0,004 24/ 24 54% 0% 8,6% 0 0 0%
A: 1,0 V: 1,0 A-V: -0,007 ct: 0,003 25/ 25 54% 0% 8,4% 0 0 0%
A: 1,0 V: 1,0 A-V: 0,001 ct: 0,003 26/ 26 54% 0% 8,4% 0 0 0%
A: 1,1 V: 1,1 A-V: -0,000 ct: 0,003 27/ 27 54% 0% 8,3% 0 0 0%
A: 1,1 V: 1,1 A-V: -0,002 ct: 0,003 28/ 28 54% 0% 8,2% 0 0 0%
A: 1,2 V: 1,2 A-V: -0,004 ct: 0,002 29/ 29 54% 0% 8,2% 0 0 0%
A: 1,2 V: 1,2 A-V: 0,001 ct: 0,002 30/ 30 54% 0% 8,0% 0 0 0%
A: 1,2 V: 1,3 A-V: -0,007 ct: 0,002 31/ 31 55% 0% 8,0% 0 0 0%
A: 1,3 V: 1,3 A-V: 0,001 ct: 0,002 32/ 32 55% 0% 7,9% 0 0 0%
A: 1,3 V: 1,3 A-V: -0,007 ct: 0,001 33/ 33 55% 0% 7,9% 0 0 0%
A: 1,4 V: 1,4 A-V: -0,002 ct: 0,001 34/ 34 55% 0% 7,8% 0 0 0%
A: 1,4 V: 1,4 A-V: -0,004 ct: 0,001 35/ 35 56% 0% 7,7% 0 0 0%
A: 1,5 V: 1,5 A-V: 0,004 ct: 0,001 36/ 36 55% 0% 7,7% 0 0 0%
A: 1,5 V: 1,5 A-V: 0,002 ct: 0,001 37/ 37 56% 0% 7,7% 0 0 0%
A: 1,5 V: 1,5 A-V: 0,001 ct: 0,001 38/ 38 56% 0% 7,6% 0 0 0%
A: 1,6 V: 1,6 A-V: -0,001 ct: 0,001 39/ 39 56% 0% 7,6% 0 0 0%
A: 1,6 V: 1,6 A-V: -0,003 ct: 0,001 40/ 40 56% 0% 7,5% 0 0 0%
A: 1,7 V: 1,7 A-V: -0,004 ct: 0,001 41/ 41 56% 0% 7,5% 0 0 0%
A: 1,7 V: 1,7 A-V: 0,004 ct: 0,001 42/ 42 56% 0% 7,4% 0 0 0%
A: 1,8 V: 1,8 A-V: 0,002 ct: 0,001 43/ 43 56% 0% 7,4% 0 0 0%
A: 1,8 V: 1,8 A-V: 0,001 ct: 0,001 44/ 44 56% 0% 7,4% 0 0 0%
A: 1,8 V: 1,8 A-V: -0,001 ct: 0,001 45/ 45 56% 0% 7,3% 0 0 0%
A: 1,9 V: 1,9 A-V: -0,006 ct: 0,000 46/ 46 56% 0% 7,3% 0 0 0%
A: 1,9 V: 1,9 A-V: -0,005 ct: 0,000 47/ 47 56% 0% 7,3% 0 0 0%
A: 2,0 V: 2,0 A-V: 0,010 ct: 0,001 48/ 48 56% 0% 7,3% 0 0 0%
A: 2,0 V: 2,0 A-V: 0,002 ct: 0,001 49/ 49 56% 0% 7,3% 0 0 0%
A: 2,1 V: 2,0 A-V: 0,007 ct: 0,002 50/ 50 56% 0% 7,2% 0 0 0%
A: 2,1 V: 2,1 A-V: 0,016 ct: 0,004 51/ 51 56% 0% 7,2% 0 0 0%
A: 2,1 V: 2,1 A-V: 0,012 ct: 0,005 52/ 52 56% 0% 7,2% 0 0 0%
A: 2,2 V: 2,2 A-V: -0,001 ct: 0,005 53/ 53 56% 0% 7,2% 0 0 0%
A: 2,2 V: 2,2 A-V: -0,006 ct: 0,004 54/ 54 56% 0% 7,1% 0 0 0%
A: 2,2 V: 2,3 A-V: -0,008 ct: 0,003 55/ 55 56% 0% 7,1% 0 0 0%
A: 2,3 V: 2,3 A-V: 0,000 ct: 0,003 56/ 56 56% 0% 7,1% 0 0 0%
alsa-uninit: pcm closed
Exiting... (Quit)
В третих что значат эти строчки:
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
[vo_gl] Using 4 as slice_height (0 means image_height).
SDL: Initializing of SDL failed: Unable to open mouse.
И еще mplayer советует его перекомпилировать:
Compiled with Runtime CPU Detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with
--disable-runtime-cpudetection
Имеет ли это смысл и как это сделать, кажется просто rpm`ом не обойтись
(в смысле автоматической сборке из src.rpm).
Подробная информация о списке рассылки Community