Сервер поддерживается Центром Информационных Технологий (095) 932-9212, 932-9213, 939-0783 E-mail: info@citforum.ru
Сервер Информационных Технологий содержит море(!) аналитической информации

Компилирование ядра Linux

# cd /usr/src/linux/
# make config     или  # make { menuconfig | xconfig }
Смысл конфигурационных параметров ядра разъясняется здесь
# make dep
# make clean
# make zlilo
# make modules
# rm -r /lib/modules/2.0.18
# make modules_install
# reboot

Компилирование ядра с поддержкой автозагрузки модулей

0) cd /usr/src/linux
1) make menuconfig
   Where I enable the features I want as odules
   (for vfat support you should answer M for FAT and VFAT)
   Besides, the kernel must be compiled with modversion
   and kerneld support enabled.(This is the second submenu in
   the config - select all the 3 items).
2) make install
   At the end the old kernel (if it's /vmlinuz) will be renamed
   /vmlinuz.old and the new will be /vmlinuz.
   This option calls the script /usr/src/linux/arch/i386/boot/install.sh
   which does the above renaming and runs lilo.If you don't want lilo just
   comment out the last line in that script.
3) make modules
4) rm /lib/modules/2.0.0 (or move to another location)
5) make modules_install
6) VERY IMPORTANT to make linux boot the new kernel.
   If you use lilo do not edit /usr/src/linux/arch/i386/boot/install.sh,
   it will install it automaticly,if not then you are using  either
   loadlin or bootdisk.Either way update your bootdisk or loadlin kernel
   (on your dos partition I guess).
7) Reboot linux.