Copyright: Copyright © 2003, Atheros Communications, Inc. All Rights Reserved
Citation: Copyright © 2003, Atheros Communications, Inc. All Rights Reserved


Displays the current wireless connection frequency and maximum speed.


Displays the currently selected configuration profile name.


Displays whether the station is connected to the wireless network.


Displays the transmit rate for the current driver connection.


Displays the receive rate for the current driver connection.


Displays the operational mode of the network, either Infrastructure or Ad Hoc.


Displays the mode of security the driver is using (Off, WEP, AES, or CKIP).


Displays the Internet Protocol address the TCP/IP protocol is using for this wireless card.


Displays a list of configured profiles. To change to another profile, click on the name in the Profile list and click on Activate.


Displays details on the selected configuration profile.


Displays the first network name (SSID1) for the selected configuration profile.


Displays the second network name (SSID2) for the selected configuration profile.


Displays the third network name (SSID3) for the selected configuration profile.


Displays the network connection type for the selected configuration profile.


Displays the wireless card address for the selected configuration profile.


Displays the security mode is set in the selected configuration profile.


Displays the default key for the selected configuration profile.


Displays the current power saving mode for the selected configuration profile.


Click on this button to create a new configuration profile and add its general, security, and advanced information.


Click on this button to modify information on the currently selected configuration profile.


Click on this button to delete the currently selected configuration profile.


Click on this button to apply the changes to currently selected configuration profile.


Displays the name of the wireless card.  This is the name that the OS assigned to the wireless card.


Displays the MAC address of the wireless card.


Displays the driver name and path of the wireless card.


Displays the wireless card driver version.


Displays the wireless card driver creation date.


Displays the network name (SSID) for the selected wireless LAN.


Displays the MAC address (BSSID) of the AP the wireless card is connected to.


Displays the operational status of the wireless card.


Displays the operational channel and frequency for the station.


Displays the available APs and ad hoc networks, specifying the network names, security, signal strength, wireless mode, channel number, and frequency.  Double-click an available network to connect to it if there is a configuration profile already created, or to create a configuration profile for that network name.


Provides measurements for the number of transmitted multicast, broadcast, and unicast frames, and for the total number of transmitted bytes.


Displays the number of transmitted multicast frames.  A multicast frame is sent to multiple recipients.


Displays the number of transmitted broadcast frames.  A broadcast frame is sent to all hosts on a network.


Displays the number of transmitted unicast frames.  A unicast frame is a frame sent to a single recipient.


Displays the number of total transmitted bytes in all frames.


Provides measurements for the number of received multicast, broadcast, and unicast frames, and for the total number of received bytes.


Displays the number of received multicast frames.  A multicast frame is sent to multiple recipients.


Displays the number of received broadcast frames.  A broadcast frame is sent to all hosts on a network.


Displays the number of received unicast frames.  A unicast frame is a frame sent to a single recipient.


Displays the number of total received bytes in all frames.


Displays the amount of operational time for the wireless card.


Click on this button to reset all statistics to zero.


Click on this button to view advanced statistics.


Click on this button to view driver information.


Click on this button to enable or disable the radio function.


Click on this button to show or hide the tray icon in the PC’s system tray. The tray icon is color-coded based on the strength of the signal and also shows the operating frequency.


Click on this button to access the Site Survey application.

Once initiated, this application displays a graphic representation of signal strength and quality to the connected AP. Identify the need of additional APs in the network using these measurements while changing the location of the wireless card.


Specify the name of this configuration profile.


Specify the network names (SSIDs) for this configuration profile.  Leave all SSIDs blank to allow connection to any AP.


Specify the first SSID for this configuration profile.  Leave all SSIDs blank to allow connection to any AP.


Specify the second SSID for this configuration profile.  Leave all SSIDs blank to allow connection to any AP.


Specify the third SSID for this configuration profile.  Leave all SSIDs blank to allow connection to any AP.


Specify the network type for this configuration profile.


Specify the power save mode for this configuration profile.


Click on a radio button to select the encryption type.


Click on this radio button to turn off encryption.


To enable dynamic security, click on the Dynamic Security radio button, select the desired security from the drop-down menu, and click Configure to enter user-defined information.


Click on this radio button to specify pre-shared keys.


Displays the key entry method.


Displays the use of hexadecimal characters (0-9, A-F) for key entry.


Displays the use of ASCII text characters (all keyboard characters except spaces) for key entry.


Click on the Per-User Key radio button to set this as the default encryption key.


Click on the First radio button to set this as the default encryption key.


Click on the Second radio button to set this as the default encryption key.


Click on the Third radio button to set this as the default encryption key.


Click on the Fourth radio button to set this as the default encryption key.


Enter the value for the per-user encryption key in this entry field.


Enter the value for the first encryption key in this entry field.


Enter the value for the second encryption key in this entry field.


Enter the value for the third encryption key in this entry field.


Enter the value for the fourth encryption key in this entry field.


Select the length of the per-user encryption key from the drop-down menu.


Select the length of the first encryption key from the drop-down menu.


Select the length of the second encryption key from the drop-down menu.


Select the length of the third encryption key from the drop-down menu.


Select the length of the fourth encryption key from the drop-down menu.


Use this checkbox to enable Lightweight Extensible Authentication Protocol (LEAP).


Click here to specify the LEAP/EAP-FAST user name and password.  The name can include up to 64 characters.


Specifies the LEAP/EAP-FAST password.  The password can include up to 64 characters.


Use this checkbox to enter a wireless MAC address.  This address overrides the wireless card’s global MAC address.


Enter the wireless card address in hexadecimal.


Allows selection of the wireless card’s scanning method used to locate APs or ad hoc networks.


Click on this radio button to specify passive scanning.  Passive scanning indicates that the wireless card is in listen-only mode.


Click on this radio button to specify automatic scanning.  The driver uses the country code to determine which type of scanning to use, either active or passive.


Specify the level of transmit power using the drop-down menu.  Actual transmit power may be limited by regulatory domain or hardware limitations.


Choose the wireless mode for the wireless card.


Choose the wireless mode that the ad hoc network starts at if no ad hoc network with the current name is found.


Use this checkbox to allow the wireless card to use the 5 GHz and 54 Mbps wireless mode.


Use this checkbox to allow the wireless card to use the 5 GHz wireless mode.


Use this checkbox to allow the wireless card to use the 2.4 GHz and 11 Mbps wireless mode.


Use this checkbox to specify the wireless mode at 5 GHz and 54 Mbps when starting an ad hoc network.


Use this checkbox to specify the wireless mode at 5 GHz when starting an ad hoc network.


Use this checkbox to specify the wireless mode at 2.4 GHz and 11 Mbps when starting an ad hoc network.


Displays the transmit power level in mW.


Displays the name of the network (SSID) the station is connected to, or is trying to connect to.


Displays whether this configuration profile is enabled to participate in a Quality of Service network.


Displays the noise level of the current connection in dBm.


Displays the state of the power save mode for this configuration profile.


Displays the frequency for the current connection.


Click on this button to close the Advanced Link Status dialog box.


Provides transmit statistics.


Displays the number of beacons transmitted by the wireless card.


Displays the number of frames transmitted correctly by the wireless card.


Displays the number of frames retried because frames received by the station were not successful.


Displays the number of frames that were dropped because they were never successfully received by the receiving station.


Displays the number of request to send (RTS) frames transmitted by the wireless card.


Provides receive statistics.


Displays the number of beacons received by the wireless card.


Displays the number of frames received correctly by the wireless card.


Displays the number of frames received with errors by the wireless card.


Displays the number of received frames that the wireless card could not successfully decrypt.


Specifies the number of frames rejected by the wireless card because a duplicated frame had already been received.


Specifies the number of clear to send (CTS) frames received by the wireless card.


Displays the number of AP authentication failures received by the wireless card.


Displays the number of AP association rejects received by the wireless card.


Click on this button to close the Advanced Statistics dialog box.


Click on this button to reset all statistics to zero.


Select the country the wireless card is operating in.


Click on this radio button to enable worldwide roaming to passively scan all channels denoted as available in the respective regulatory domain.


Click on this button to enable the changes to the country code.


Click on this button to terminate and close the Country Code selector.


Displays the strength of the signal either as a percentage or in dB.


Click on this button to show signal strength as a percentage.


Click on this button to show signal strength in dB.


Displays the statistics data based on the Refresh Interval (Relative) or based on total over time (Cumulative).


Click on this button to collect statistics based on the Refresh Interval.


Click on this button to accumulate statistics.


Displays the interval in seconds to collect relative statistics.


Click on this button to enable the changes to the Display Settings dialog box.


Click on this button to terminate and close the Display Settings dialog box.


Use the General tab to configure the network names and configuration name for a configuration profile.


Click the tools buttons to enable/disable the radio, open the Country Code Selector, and/or enable/disable the tray icon.


Use the Profile Management tab to add a new configuration, modify a configuration, remove a configuration, or change to a different configuration profile.


The Diagnostics tab displays the driver statistics.


Select Long-Only or Long & Short preamble mode for a 802.11b and 802.11g networks.  Long-Only is used for backward-compatibility with older wireless cards.


Use this page to add the static security encryption keys.


Click the Refresh button to rescan for and refresh the list of available APs and ad hoc networks.


Use the Advanced tab to set the advanced configurations for the configuration profile.


Click the Define Pre-Shared Keys button to open a dialog box and enter the pre-shared keys.


Use the Security tab to set the encryption type and configure dynamic security.


Set the preamble mode to Short & Long, which enables the wireless card to choose which preamble mode to use.


Set the preamble mode to Long-Only.  This mode is used for backward-compatibility with older wireless cards.


Select a radio button to choose a default key, then fill in the key field and choose a length from the drop-down menu.


Displays current information about the driver.


Use the WLAN status tab to view current connection information as well as a list of available APs and ad hoc networks.  Switch to a new connection from this list.


Displays advanced transmit and receive statistics for the wireless card.


Displays advanced information about the link.


Click the Advanced button to view advanced information about the link.


Use the Country Code Selector to change the country the wireless card is set for.


The Current Status tab displays information about the link.


The About Box displays the build date and version number for this application.


The Settings Box allows changes to the display and information gathering interval in cumulative or interval mode.  Interval mode zeroes out the statistics at the start of each measurement interval.  The information-gathering interval is displayed in seconds.  Change the interval by entering a new value or using the up/down arrows at the right.  Shortening the interval uses more CPU time.  Display the relative signal strength in either decibels (dB) or percentage.


Click the Activate Button to switch to a highlighted AP or ad hoc network.  Alternatively, double click the SSID.  If no profile exists for that SSID, a new profile opens with the selected SSID filled in.  Complete the profile settings and press OK to activate the profile.


Press the Activate Button to switch to the selected profile.  Alternatively, double click the profile name.


Displays the currently selected channel.


Use this checkbox to allow the wireless card to use the 2.4 GHz and 54 Mbps wireless mode.


Use this checkbox to specify the wireless mode at 2.4 GHz and 54 Mbps when starting an ad hoc network.


Use this drop-down menu to select the channel to start the ad hoc network.


Enter a LEAP/EAP-FAST password.


Confirm the entered LEAP/EAP-FAST password.


Click here to enable LEAP/EAP-FAST entries.


Click here to clear and close the Define User Information dialog.


Click here to display a list of available APs and ad hoc networks.


Enter the LEAP/EAP-FAST user name.


Click here to enable changes to the Profile Management dialog.


Click here to cancel changes and close the Profile Management dialog.


Click here to disable Zero Configuration.


Click here to leave Zero Configuration enabled.


Click the checkbox to disable the viewing of this dialog in the future.


The ACU was selected during the installation process. Zero Configuration is also enabled. Select whether to use the ACU or Zero Configuration.


Click here to clear and close the Define User Information dialog.


Specify the network names (SSIDs) for this configuration profile.


Use the following radio buttons to specify security options.


Use the Configure button to enter user information for the specified security option.


Enable the WPA checkbox and click Configure to enter Wireless Protected Access information.


Specify the desired dynamic security from the drop-down menu.


Click OK to enable the WPA password phrase.


Click here to cancel changes and close the dialog.


Enter the password for WPA security. The minimum password is eight characters in length.


Use this dialog to enter information about the dynamic security mode.


Enter the user name and password for dynamic security in the provided data-entry fields.


Enter the user name for dynamic security in the provided data-entry field.


Use this data-entry field to enter the user name for dynamic security.


Enter the password for dynamic security in the provided data-entry field.


Use this data-entry field to enter the password for dynamic security.


Re-enter the password for dynamic security in the provided data-entry field.


Use this data-entry field to re-enter the password for dynamic security.


Select the desired certificate from the drop-down menu.


Specify the certificate authority to use from this area.


Click on this radio button to use any certificate authority.


Click on this radio button to specify a certificate authority to use from the drop-down menu.


Use this drop-down menu to specify a certificate authority to use.


Enter the server/domain name for the RADIUS server.


Enter the login name for the RADIUS server.


Click here to apply the changes to the Define Certificate dialog.


Click here to cancel the changes and close the Define Certificate dialog.


Specify the certificate authority to use from this area.


Click on this radio button to use any certificate authority.


Click on this radio button to specify a certificate authority to use from the drop-down menu.


Use this drop-down menu to specify a certificate authority to use.


Enter the server/domain name for the security server.


Enter the login name for the security server.


Click here to enter information in the Define User Information dialog for the security server.


Click here to apply the changes to the Define Certificate dialog.


Click here to cancel the changes and close the Define Certificate dialog.


Use this dialog to enter the WPA password phrase.


Use this dialog to enter information on TLS dynamic security.


Click Import to import a configuration profile.  Browse to the directory where the profile is located, highlight the profile, then click Open to import the profile.


Click Export to export a configuration profile.  Browse to the directory to save the profile to, then click Save to export the profile.


Click Order to set the order the configuration profiles appear in the Profile Management window.  In the Auto Profile Selection Management window, click Move Up or Move Down as appropriate, then click OK.


When auto profile selection is enabled by checking Auto Select Profiles on the Profile Management tab, the client adapter scans for an available network. The profile with the highest priority and the same SSID as one of the found networks is the one that is used to connect to the network. If the connection fails, the client adapter tries the next highest priority profile that matches the SSID, and so on.


The Troubleshooting Utility is an optional utility that identifies and resolves wireless adapter configuration and association problems when the adapter is in access point (infrastructure) mode. This utility is available only in Mini PCI solutions.


Indicates the server based authentication method.


Indicates the server based authentication method.


Indicates the security mode used for data encryption.


Indicates the authentication type. Auto causes the adapter to attempt authentication using shared, but switches it to open authentication if shared fails. Open enables an adapter to attempt authentication regardless of its WEP settings. It will only associate with the access point if the WEP keys on both the adapter and the access point match. Shared only allows the adapter to associate with access points that have the same WEP key.


Indicates whether MIC is enabled. MIC prevents bit-flip attacks on encrypted packets.


Displays the name of the associated access point.


Displays the IP address of the associated access point.


Displays the MAC address of the associated access point.


Displays the current signal strength in dBm or percentage.


Displays the current noise level (signal quality) in dBm or percentage.


Shows how long the client adapter has been receiving power (in hours:minutes:seconds). If the adapter runs for more  than 24 hours, the display shows in days:hours:minutes:seconds.


Displays the 802.11b preamble format. Configure the preamble format on the Advanced tab


Shows the current receive rate in Mbps.


Shows the current transmit rate in Mbps.


Shows the currently connected channel.


Displays frequency the station is using.


Displays the number of frames transmitted that do not require an acknowledgement.


Displays the number of frames transmitted that received an acknowledgement.


Displays the number of cyclic redundancy check errors received.


Displays the number of access point mismatches received.


Displays the number of data rate mismatches received.


Displays the number of request-to-send frames transmitted.


Displays the number of clear-to-send frames transmitted.


Displays the number of not clear-to-send frames transmitted.


Displays the number of retried request-to-send frames transmitted.


Displays the number of retried data frames transmitted.


Displays the number of authentication time-outs received.


Displays the number of association time-outs received.


Displays the number of standard MIC authentications received.


Displays the number of standard MIC errors received.


Displays the number of CKIP MIC authentications received.


Displays the number of CKIP MIC errors received.


Displays the number of CTS frames received.


Displays the name of the client computer.


Displays the serial number of the wireless adapter.


Displays the strength of the signal.


This field displays the available profiles for auto profile selection management.


Click Add to include a profile in auto profile selection. On the Profile Management tab, click the Order Profiles button. The Auto Profile Selection Management window appears, with a list of all created profiles in the Available Profiles box.  Highlight the profiles to add to auto profile selection, then click Add. The profiles appear in the Auto Selected Profiles box.


This field displays the auto selected profiles.


Highlight an available profile or an auto selected profile, then click Move Up to move the selected profile up in order on the list.


Highlight an available profile or an auto selected profile, then click Move Down to move the selected profile down in order on the list.


Highlight an available profile or an auto selected profile, then click Remove to delete the selected profile in the list.


Click OK to accept the changes made in the Auto Profile Selection Management window.


Click Cancel to cancel any changes made in the Auto Profile Selection Management window.


Selects the transmit power level for 802.11a in mW. Actual transmit power may be limited by regulatory domain or hardware limitations.


Select what mode the wireless adapter uses to authenticate to an access point: Auto causes the adapter to attempt authentication using shared, but switches it to open authentication if shared fails. Open enables an adapter to attempt authentication regardless of its WEP settings. It will only associate with the access point if the WEP keys on both the adapter and the access point match. Shared only allows the adapter to associate with access points that have the same WEP key


For infrastructure (access point) networks, click the Preferred APs button to specify up to four access points to which the client adapter should attempt to associate.


Identifies the client machine.


If the access point that the wireless adapter is associating to has WEP set to Optional and the client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the Security Tab to allow association.


Select to Use Temporary User Name and Password by choosing the radio button:

Check Use Windows User Name to use the Windows user name as the authentication user name. OR: Check Manually Prompt for User Name and Password to manually login and start the authentication process.


Select to Use Windows User Name to use the Windows user name as the authentication user name.


Select to Manually Prompt for User Name and Password to manually login and start the authentication process.


Select to specify the authentication user name, password, and domain to save and use.


Select to specify the authentication user name to save and use.


Select to specify the authentication password to save and use.


Confirm the authentication password to save and use.


Select the specific domain name to save and use.


Check the Include Windows Logon Domain with User Name setting to pass the Windows login domain and user name to the RADIUS server. (default setting)


If desired, check No Network Connection Unless User Is Logged In to force the wireless adapter to disassociate after logging off.


Enter the authentication timeout time (between 30 and 500 seconds) to specify how long authentication should wait before declaring authentication failed, and sending an error message.  The default is 90 seconds.


Click OK to save the changes made in the settings window.


Click Cancel to cancel the changes made in the settings window.


Select the appropriate network certificate authority from the drop-down list.


Check Use Windows User Name to use the Windows user name as the EAP-GTC user name.


Enter a PEAP user name in the User Name field to use a separate user name and start the EAP-GTC authentication process.


Selects Token Password.  Note that Token uses a hardware token device or the Secure Computing SofToken program (version 1.3 or later) to obtain and enter a one-time password during authentication.


Selects a static password.


Click Settings to specify a specific server or domain and login name.  Leave the server name field blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Network Certificate Authority drop-down list. (recommended) OR: Enter the domain name of the server from which the client will accept a certificate.


Edit the static password.


Click OK to save changes made in the EAP-GTC configuration window.


Click Cancel to cancel changes made in the EAP-GTC configuration window.


For infrastructure (access point) networks, enter the MAC address of an access point button set it as the first preferred access point the client should attempt to associate to.


For infrastructure (access point) networks, enter the MAC address of an access point button set it as the second preferred access point the client should attempt to associate to.


For infrastructure (access point) networks, enter the MAC address of an access point button set it as the third preferred access point the client should attempt to associate to.


For infrastructure (access point) networks, enter the MAC address of an access point button set it as the fourth preferred access point the client should attempt to associate to.


Click OK to save changes made in the Preferred Access Points window.


Click Cancel to cancel changes made in the Preferred Access Points window.


Check Use Windows User Name to use the Windows user name as the security user name.


Use this radio button to set the length of the pre-shared key to 64 bits. For 64-bit keys, enter 10 digits for hexadecimal, 5 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 64 bits. For 64-bit keys, enter 10 digits for hexadecimal, 5 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 64 bits. For 64-bit keys, enter 10 digits for hexadecimal, 5 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 64 bits. For 64-bit keys, enter 10 digits for hexadecimal, 5 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 128 bits. For 128-bit keys, enter 26 digits for hexadecimal, 13 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 128 bits. For 128-bit keys, enter 26 digits for hexadecimal, 13 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 128 bits. For 128-bit keys, enter 26 digits for hexadecimal, 13 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 128 bits. For 128-bit keys, enter 26 digits for hexadecimal, 13 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 152 bits. For 152-bit keys, enter 32 digits for hexadecimal, 16 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 152 bits. For 152-bit keys, enter 32 digits for hexadecimal, 16 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 152 bits. For 152-bit keys, enter 32 digits for hexadecimal, 16 ASCII characters. This length must match the key length on the access point.


Use this radio button to set the length of the pre-shared key to 152 bits. For 152-bit keys, enter 32 digits for hexadecimal, 16 ASCII characters. This length must match the key length on the access point.


Specify the LEAP/EAP-FAST user name to save and use.


Specify the LEAP/EAP-FAST password to save and use.


Use the LEAP/EAP-FAST user name and password settings window to set up the LEAP login.


Click OK to save the changes made in the LEAP/EAP-FAST settings window.


Click Cancel to cancel the changes made in the LEAP/EAP-FAST settings window.


Set the mode the wireless adapter uses to authenticate to an access point to Auto. Auto causes the adapter to attempt authentication using shared, but switches it to open authentication if shared fails.


Set the mode the wireless adapter uses to authenticate to an access point to Open. Open enables an adapter to attempt authentication regardless of its WEP settings. It will only associate with the access point if the WEP keys on both the adapter and the access point match.


Set the mode the wireless adapter uses to authenticate to an access point to Shared.  Shared only allows the adapter to associate with access points that have the same WEP key.


Selects the transmit power level for 80211b/g in mW. Actual transmit power may be limited by regulatory domain or hardware limitations.


Selects the transmit power level for 802.11a in mW. Actual transmit power may be limited by regulatory domain or hardware limitations.


Selects the transmit power level for 80211b/g or 802.11a in mW. Actual transmit power may be limited by regulatory domain or hardware limitations.


Displays the 802.11a available power levels.


Displays the strength of the signal.


The Profile Management list box displays the profiles already created.  The active profile is indicated with an icon.


Enables the use of Wi-Fi Protected Access (WPA) security. Choose the security radio button, then select EAP type from the drop-down menu.  Click Configure to set up.


Enables the use of Wi-Fi Protected Access (WPA) passphrase security. Choose the security radio button, then click Configure to set up.


Enables the use of 802.1x security. Choose the security radio button, then select the EAP type from the drop-down menu.  Click Configure to set up.


Enables the use of pre-shared keys that are defined on both the access point and the station. Choose the security radio button, then click Configure to set up.


No security (not recommended).


Choose the radio button for the type of security to use, then click Configure to set up the security type.


Select the Wi-Fi Protected Access (WPA) security EAP type from the drop-down list.  Click Configure to set up.


Select the 802.1X security EAP type from the drop-down list.  Click Configure to set up.


Leave the server name field blank for the client to accept a certificate from any server with a certificate signed by the   authority listed in the Network Certificate Authority drop-down list. (recommended), or enter the domain name of the server from which the client will accept a certificate.


Change the login name if needed.


The Adapter Information button contains general information about the network interface card (the wireless network adapter) and the network driver interface specification (NDIS) driver.


Displays the 802.11b/g available power levels.


Shows the current country of operation.


Use this checkbox to allow the wireless card to use Super AG mode.


Use this checkbox to allow the wireless card to use eXtended Range (XR)  mode.


Use this checkbox to allow the wireless card to use QoS (WMM) mode.


Use this checkbox to use the machine name as the security user name.


Use this checkbox to use the Windows user name as the security user name.


Use this checkbox to specify the user information.


Enter a user name into this field to use a separate user name and begin the authentication process.


Enter a password into this field to use a separate password and begin the authentication process.


Re-enter the password into this field to confirm the separate password and begin the authentication process.


Click to enter a new domain name from which the client will accept a certificate.


Enter a new domain name from which the client will accept a certificate.


Enter a login name to the new domain from which the client will accept a certificate.


Click OK to make domain name and login name changes.


Click Cancel to cancel domain name and login name changes.


Click to enter a new domain name from which the client will accept a certificate.


Enter a password into this field to use a separate password and begin the authentication process.


Re-enter the password into this field to confirm the separate password and begin the authentication process.


Use this checkbox to allow automated protected access credentials.


Choose a protected access credential authority from the drop-down list.


Click the Select More button to import more protected access credential profiles.


Click the Import button to browse to and import a new EAP-FAST PAC.


Highlight an EAP-FAST PAC and click the delete button to delete the EAP-FAST profile.


The PAC store list displays available EAP-FAST PACs. Use this window to import or delete EAP-FAST PACs.


Click the Global radio button to display only public EAP-FAST PACs.


Click the Private radio button to display only private EAP-FAST PACs.


Click OK to accept all changes in this window.


Click Cancel to close this window without accepting any changes.


Select to have the system automatically prompt for user name and password.


Use this checkbox to set the profile as a system profile. A system profile is accessible to all users. It can also be used as a template to create more profiles.


Enter the login name.


The SIM card list displays available SIM cards. Select Any SIM Card to use any SIM card available at runtime.


Click to enter PIN number to access SIM card.


Re-enter PIN number to access SIM card.