ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex USB Fast Ethernet Adapter º º CopyRight(c) 2001 Compex Inc. º º All rights reserved º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Compex LinkPort/UE202-B USB to Fast Ethernet adapter requires the USB port to have at least USB specification 1.1 (12Mbps). It connects the notebook or PC to the standard 10Mbps or 100Mbps speed Ethernet network and can have a maximum performance of up to 8Mbps. Support models: Compex LinkPort/UE202-B. --------------- HARDWARE SETUP --------------- For : LinkPort/UE202-B ---------------- This version of Compex LinkPort/UE202-B USB to Fast Ethernet Adapter has a small form factor that you can plug directly to the USB port. A USB extender cable is also provided. Both ends of the extender come with A-type connector, one end is a male plug, the other end is a female socket. For desktop PC you will no need to use this extender. However, on some notebooks, you may need to use the USB extender if space is a constraint to plug on the UE202-B adapter to the USB port. Next after connecting the adapter to the PC or Notebook, you need to connect a network cable (straight-through, category 5 cable) to the UE202-B RJ-45 socket (i.e. the LAN port) and the other end to a standard ethernet repeater hub or a switch. UE202-B Ethernet port can auto-sensing or auto-negotiation automatically 10Mbps or 100Mbps speed when connected to a Ethernet repeater hub or switch. The respectively 10 or 100 LED light light up to indicated the connection speed. To install the driver for MS Windows 98/ME and MS Windows 2000 please refer to the respective directory for installaion instruction.