Demo testing of Wake-On-LAN on RE100ATX/WOL adapter
--------------------------------------------------

1) Install RE100ATX/WOL card in a free PCI slot of motherboard.
   The PC (Station A) use must support power management.
2) The PC must be in the power off state. Standby power is supply to
   RE100ATX/WOL adapter through the PCI bus.
3) Install another RE100TX-PCI or RE100ATX/WOL card in another PC (Station B).
   Boot up MS-DOS and run the diagnost utility.
4) Select Power Management option and then Magic packet option.
   It will prompt to input the destination MAC address of the RE100ATX/WOL
   adapter. Enter the MAC address of the RE100ATX/WOL that is installed in
   Station A and press Enter key.
   Immediately Station A on receiving the Magic packet will be wake up and
   the PC will start to boot.
 5) Wake-On-LAN using Magic packet test is successfully executed.

                        --------------------------