________________________________________________________________
       |                                                              |
       |       Compex RE100ATX 10/100 PCI Fast Ethernet Adapter       |
       |        (C) Copyright PDS, 2002. All Rights Reserved.         |
       |______________________________________________________________|
       

Novell NetWare 5.0
------------------
This directory contains the Novell NetWare v5.0 server LAN driver.
This server driver is written to the latest Novell driver specifications.

Manual Installation
-------------------
This assumed CD drier disk is in drive D. If yur CDROM has different
drive letter then use your drive letter instead. 


1) Load NWCONFIG at the server console.
   Select Driver Installation option | Select Driver
   A list of drivers will display.

2) Press INS key to install driver from the driver disk provided.

3) Press F3 key to change the path to D:\NW5.0 where the driver is.

4) Press ENTER to select the adapter "Compex ReadyLINK Express 10/100 PCI
   Fast Ethernet Adapter"

5) Enter the SLOT number where the adapter is installed in the PC.
   Skip if do not know [See note (5a) on adding the slot number later as
   described below].

6) By default all 4 frames types Ethernet 802.2, 802.3, II and SNAP will be
   loaded. To chose only the necessary frame types, position the cursor at the
   protocol box at the top. Then press F3 key will display the Frame selection
   box. Mark to select by pressing the ENTER key and TAB key to skip to the
   next option. Press F10 to save and returm to driver configuration menu.

7) Press F10 to save.


Notes:-
(5a) In doing so, the driver loading process will fail to
   complete and a timeout screen will appear and ask to switch the to console
   screen. From the console The driver should have scanned and found the slot
   where the card is installed. Record the number. You may have to manually
   edit the AUTOEXEC.NCF file to add the slot number to the line that loads
   the RE100.LAN driver. e.g., if the slot number is 1
        LOAD RE100 Slot=1 Frame=Ethernet_802.2 Name=RE100_1_802
        BIND IPX RE100_1_802 net=12345678


                        -------------------------